Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We're migrating APs from old AireOS 2504 WLC to C9800-CL (running on 17.3.3) and when APs are migrated to C9800, macOS clients are unable to connect to WPA2 SSID with PSK authentication (FlexConnect local switching). Windows laptops and phones ...
Hello, I've read many forum posts with similar issues and still haven't found working solution for clients' illogical disassociations and deauthentications from WAP361 access points. Issue is exactly the same as other people are experiencing: Clients...
Hello, Users from our inside network at work are unable to connect to outside PPTP server through ASA (ASA5515 with SW version 9.8(2)20) with PAT, PPTP is working without issues from home or via mobile hotspot. We have PPTP inspection in place which ...
auto-upgrade enabled means that if you add another switch into the stack in the future, you don't have to stage it to the same SW version prior to addition, instead it will be upgraded to correct version automatically and then added to the stackIt ha...
It can be used on normal stack, I just did in on three C9300 stacks, here's the real-life guide:
1) connect switch with different SW version to the stack, just make sure you have the same license level (essentials or advantage), new switch with appea...
Hi,
according to Cisco documentation about delete reasons (https://developer.cisco.com/docs/wireless-troubleshooting-tools/client-delete-reasons/), it could be normal behavior:
Do AP logs say something relevant about these deletes? As per Cisco docu...
Hello,
I have an alternative solution that doesn't require downgrading of VMware Workstation / Fusion.
When I deployed vWLC with AireOS 8.10.151.0 directly in VMware Fusion, I experienced the same behavior of vWLC Management interface - I could't eve...
Hi,
all phones were working fine (both iPhones and Androids), it was just MacBooks having issues after migration from AireOS WLC to C9800.How do you handle DHCP for clients? Are you using Cisco best practices for C9800 (https://www.cisco.com/c/en/us/...
