About molivere17982

molivere17982 · 10-17-2019

Hello all.I've added a new B200M3 to my chassis and created a clone of one of my existing B200M3 profiles and I'm getting the following error. I've never seen this before and attached a picture

molivere17982 · 03-08-2017

Tried going from 6.0.0.1 to 6.0.1 and now get this when I login: The upgrade failed to install.The upgrade failed to install. The upgrade failed on while running .Please contact customer support: tac@cisco.com1-800-553-2447 or 1-408-526-7209 When...

molivere17982 · 02-24-2016

Hey all, I was able to pick up a almost brand new UCS B series starter kit. It includes (1) 5108 (6508 model) chassis, (2) B200-M2, (2) UCS-6248UP's and (2) UCS 2208XP. My question is can I convert this to a UCS Mini aka can I swap the 2208XP's with ...

molivere17982 · 12-05-2012

I'm having trouble with desktop phone control. I did a wireshark trace and its doing a SIP register with my old mac SEPXXXX.I swapped phones by changing the MAC address field in CUCM and re-associated it under end user.Any ideas?Thanks,Mike

molivere17982 · 02-17-2011

Hi All,I can't for the life of me figure out why I can't upload a prompt on version 8. I thought it was a permissions issue so I made my user an admin and that didn't work. So then I login via crsadmin and it still won't upload.I get authenticated v...

molivere17982 · 03-08-2017

Marvin, Thanks for the reply. I found the log and also found out the power was cut during the upgrade....not good. [170307 22:22:27] Verifying running processes ...[170307 22:23:14] BEGIN 200_pre/501_recovery.sh[170307 22:23:51] http server is ena...

molivere17982 · 12-05-2012

Presence server shows correct device MAC, but in the wireshark trace I switch to deskphone I see a SIP register with the old device name SEPXXXI rebooted both CM and CUP

molivere17982 · 11-10-2011

The problem I found way UCCX 8.x does not like upper case file names. So if you named the file Test.WAV or Test.Wav it would not upload, but test.wav would.If you use my script with lower case file names you will be fine.

molivere17982 · 02-17-2011

If you look at my script it authenticates the same way yours does,I tried yours and it I get the same when it runs the upload functions..just dies and kills the script.

molivere17982 · 12-20-2009

Anthony how would I apply your code? in a set command?Thanks,Mike

Member Since	‎08-15-2007 06:15 AM
Date Last Visited	‎06-22-2022 12:08 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

Adding new B200 M3 Error

FMC virtual fails on upgrade

Convert older UCS 5108 to UCS Mini?

CUPC 8.6.3 using old deskphone MAC

UCCX 7 to 8 Prompt recorder issues won't upload

Marvin,

CUPC 8.6.3 using old deskphone MAC

UCCX 7 to 8 Prompt recorder issues won't upload

Re: UCCX 7 to 8 Prompt recorder issues won't upload

Re: Regular Expression in a Script