Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I have a campus (warehouse) with 60 access switches to connect wireless access points, printers, computers and picking devices.
My core is collapsed with distribution and I have two separated rooms for high availability with one Cisco 6509...
Hi guys, Considering hub and spoke networks, what are the reasons having IP distribution layer or just core layer? Distance? Simplicity? Costs? Number of hops? Pairs of fiber that are needed to make the architecture?Let's assume 200 spokes and 2 hubs...
Hi guys, I have 3 questions regarding IP/MPLS architecture.1. Let's consider one network "hub and spoke" with 200 "spoke" sites that are connected with 9 core sites (each remote is connected with 2 core sites for HA) to reach 2 "Hubs".The network lay...
Hi guys,I am trying to upgrade the OS from w2k3 to w2k8 STD 32bits.I am using Cisco ACS v. 4.2.(1) path level 15 on this OS.When i try to activate de EAP-MSCHAPv2 after creating certificates (self sign or using external CA), the follwing problem is r...
Hi guys,Hi have the follwing scenario:two 6509 chassis with VSS configuration.One of those chassis have one FWSM installed and the configuration is like this:Switch:firewall multiple-vlan-interfacesfirewall switch 1 module 3 vlan-group 1firewall vlan...
Thank you very much for your answer.
In fact i never had considered the new cat9000. Is the cheapest choice considering 10G network? I need to take a close look.
ACI on campus will be difficult, maybe Cisco SD Access, don't you agree? In that case ...
Thank you very much for your answer.
You are considering physical separation of server farm with cat3650 even with 10 servers?
I agree SUp6T is better, but i don't have performance issues. In that case SUP2T is cheaper
9200 and 9300 nexus is a ...
Hello said.izawi, Thank you for your answer. I understand your point of view. This case is not about only the logical design but also physical constrains regarding distances. I need to consider transmission technologies like SDH, CWDM, DWDM versus re...
Hi Markuz, Thank you very much for your answer.The main question here is, where should you terminate the LSP or MPLS domain?On the PE, or CE routers?If you configure the CE to be PE router then you don't need the atual PE routers (aggregation nodes) ...
