About glynnd

glynnd · 11-15-2004

Is it possible to turn VAD off from IP Phone to IP Phone in CME? Is there anyway to tweak VAD from IP Phone to IP Phone in CME?

glynnd · 11-02-2004

Does anyone know how to turn off mute on auto-answer on the intercom function is CME 3.2? I do not want the phone to be in Mute by default when an intercom call is received.

glynnd · 10-14-2004

I am installing a CCME 3.2 system. I have a overhead speaker paging system that is connected via an ATA-186. I can call the associated extension and get connected to the overhead speakers, but if I put that ephone (and all of the other ephones) in ...

glynnd · 02-07-2012

Is there another solution here? I also installed the 5.3.0.40.1 patch and I have the same problem with the database upgrade. Re-installing with the ISO file is going to be a real problem for me considering I have these things all over the world.

glynnd · 03-12-2008

yes, you can just use the copper ports rather than the fiber ports if distance between the 2960 and the 4500 is not a problem

glynnd · 03-12-2008

what do you meantha the one-to-one nat "doesn't work" because in the next statement you say that it does work. Got the config?

glynnd · 07-06-2007

if the wireless network should be treated as hostile, why did you decide to make the 192.168.3.1 interface the "inside" interface on the PIX. Shouldn't you make it the outside interace.

glynnd · 07-01-2007

you probably created more than one SVI's. Other than the one inside interface, which in your case is vlan 10. For any other vlans on your FWSM, you do NOT want to create layer 3 vlan interfaces in IOS.

Member Since	‎08-05-2003 06:19 AM
Date Last Visited	‎02-17-2021 08:00 PM
Posts	24

User Statistics

User Activity

CME vad

cme intercom mute on auto answer

CCME ata paging-dn

ACS 5.3 view-logprocessor not monitored

Re: 2960G uplink

Re: Cisco ASA 5510

Re: PIX ACL issue - Deny Internal Access to External Network

Re: Sup720 communicating with fwsm