Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a problem with CB21AG cards causing high CPU utilization on WinXP. Task manager shows the CPU pegged at 100%, but the individual processes don't add up to 100%. IE, there are "missing" CPU cycles. Using Process Monitor from SysInternals, w...
Questions, I have 3550 switch, unfortunately its the one that has 10 1000mb slots and 2 10/100/1000 slots. I just purchased a copper GBIC converter that converts 1000mb slot into RJ45 connection. Unfortunately when I try to hook up 100mb fasteth0/0 ...
All, was having issues with the dropped packets counters incrementing for no reason. TAC claims this is the same bug as you were seeing. I was instructed to try the latest 1000V release and it has resolved the dropped packet counter issue. Can you ...
Avi, I ran across this and thought of you!From http://www.cisco.com/en/US/docs/ios-xml/ios/wan_otv/configuration/xe-3s/wan-otv-confg.htmlConfigure the join interface and all Layer 3 interfaces that face the IP core between the OTV edge devices with t...
I had a similar issue i enabled the smarttunnel checkbox, and this time i am getting different error. Microsoft Visual BasicRun-time error '1177' The document name or path is not valid.Try one or more of the following: According to the microsoft web...
Ok, to answer the first question, I did make sure that no shut command is executed on the router port and the gigabit switch port (that's the first thing I checked). The light on the port didn't come up.Answer to the second question is, well I am us...
Include will include them in the filter. Exclude excludes them from the filter. So.. In general, use includes. I know it may seem backwards but it does work.
