Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Could someone help me with configuring FTP port forwarding with pix515e?.Have tried this setup:static (inside,outside) tcp 203.175.x.x 20 10.130.x.x 20static (inside,outside) tcp 203.175.x.x. 21 10.130.x.x. 21Then added it to the allow list of acc...
Hi,Can someone help me with ftp port forwarding config on PIX515E?Sample:Public IP--->PIX------------>Router------>FTP Server202.176.x.x->PIX->10.233.x.x->Router->10.234.x.x->FTP ServerI only need to forward the ftp ports (20 & 21)only.ThanksCliff
Hi All,Does anybody knows how to integrate my 7204VXR router with Avaya Definity for Voip service?Both ends will have vxr & avaya definity via T1 data connection.Please, i really need your help & expertise.Thanks Cliff
Hi All,Just wanna ask how will i integrate a 7204VXR router with Avaya Definity PBX?I just wanna use my T1 data connection for VoIP service to cater other calls from our Avaya definity.How should i configure it?ThanksCliff
Hi All,We have intranet w/c is connected with two 7204VXR router. Just wanna ask what should i need in order to configure our intranet data connectivity for voip service with Avaya Definity PBX & how will i configure it.>I have one DS1 card for Ava...
Hi jon,I have tried the sample you gave but still it doesn't work, i guess i have given an incomplete details.Here is the complete setup.Public->Router----->PIX------>Router-->FTPServer202.176.x.x->203.175.x.x->y.y.y.y->10.130.x.x>I just need to port...
I have been seeing a lot of samples but i couldn't understand some of the parameters.Like the one below:voice-port 2/0/0ren 5signal groundStart!voice-port 2/0/1!dial-peer voice 7000 potsdestination-pattern 3000port 2/0/0forward-digits 0!dial-peer voi...
thanks,also i have multi-channel T1/Pri card with 2 ports.How would i configure if my setup is like this?1. PA-VXC-2TE1 > inbound or going to intranet end2. multi-channel T1/Pri will be going to Avaya/DS1.Is it the right setup?.How should i configur...
