access-list outside_access_in permit outside host to static nat address eq portYou will need to have your static nat entry as well for your inside host. The oustside user will hit the outside static NAT address for your host.Best,James.
If you do a "show vlan brief" do you see all vlans properly? Are they active? In order for VTP to work correctly, both switches will need to be in the same vtp domain. I recommend making one switch a server and the other a client, be sure to set t...
Unfortunately you are at the mercy of the 500 and will be forced to use the IP Phone + Desktop role. I deployed 26 to a client (not my design) and the smartports were a very limiting factor. Another item of note is that IP ARP inspection is turned ...
If I understand you correctly, you want to do NAT with overalapping IP addresses. Here is a link that will give you an example.http://www.cisco.com/en/US/partner/tech/tk648/tk361/technologies_configuration_example09186a0080093f30.shtml