Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have one t1 connection and Toll by pass is already configured in the ccme . i would like to add one more t1 and segregate the toll by pass calls only through new t1 . is it possible and what hardware is needed for this and do we require more dsp re...
Hi i am facing a problem with the ccm 4.0 telephone directory when i clcik the directory it prompt for the username , password and realm instead of missed calls recived calls and placed number.for voice messaging we are using Unity too.please help ...
when i make voip call from callmanager configured with a sip trunk connected to the service provider, the call disconnect at 60 minute how i can make it to 4 hours?
Hi Robi am fine how about you thank you for your reply actually i need to create a prefix 600 From Router A if a user dial 600 and 3 Digit extension number the 600 number needs to discard at router A and sent the calls to router B Example: 600601 dia...
Hi Marwan i appreciate your help , could you please tell me which specified ports i need to open in firewall to connect the cisco ip communicator through public ip address. i had nat the private ccm ip to public ip and open all ports . But stil it is...
Thanks for your reply we are using vpn to connect the cipc but most users are roaming around so could you kindly let me know, how it is possible to connect through the public tftp server. We will open the specified ports to communicate with CIPC to s...
