Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI update my 1100 AP from wireless B toWireless GAnd now it requiring a 5501.img fileInterface Dot11Radio0, no radio firmware file (flash:/c1100-k9w7-mx.123-4.JA1/5501.img) was foundWhen I try to download it the Cisco do not give for me perm...
HII have 1812w access routerSo he has 2 wan ports 8 switch portsWhen I connect my WAN port 0 to the WAN my router has the internetIt is no problem to connect another port 1 to my LAN and LAN has as well Internet When I plug another PC to the switch p...
Hello I have cisco router 1812/k9 witch don't have wireless capabilityrouter CISCO1812W-AG-E/K9 does. My router have mini PCI slot in witch I can plug Wireless mini PCI card sow maybe some body know witch Wireless module is myIf you have router CISCO...
Step 1 Set the static IP address of the PC on which your TFTP server software runs to an address between 10.0.0.2 and 10.0.0.30. Step 2 Make sure that the PC contains the access point image file (such as c1100-k9w7-tar.123-8.JA.tar for a 1100 series ...
Yes they let to download privileged peopleI do not have these privileges for this router 1812wYes I can download some older Cisco devices IOSBut note this router they do not give for me the permitionTo downloadIf you have an access to this Cisco 1812...
HiI have readied that publication beforeAnd using the NATI need that 8 switch ports on my router will have the same Internet asMay port fa1 192.168.1.0 inside So how to do that all 8 switch pots on the same router will se the fa1Because it do not se...
