02-07-2007 05:07 AM - edited 07-03-2021 01:35 PM
Hello
I update my 1100 AP from wireless B to
Wireless G
And now it requiring a 5501.img file
Interface Dot11Radio0, no radio firmware file (flash:/c1100-k9w7-mx.123-4.JA1/5501.img) was found
When I try to download it the Cisco do not give for me permition
When I try to upgrade IOS it does not work properly
02-12-2007 01:40 PM
Well, upgrade of hardware (from B to G) shouldn't require firmware upgrade. Any way, if you need to upgrade the firmware go for the TFTP server based upgrade. This procedure is explained at http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184ad5.html#1038660
Cisco is not letting you download the firmware because your contract is not renewed. They will refuse to replace the unit also in case of major lockup during upgrade.
Good luck.
02-15-2007 09:00 AM
it do nit works
12.11 IOS do not startup
and IMG file is not there
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide