Cisco Unity connection : Active version: 11.0.1.21900-11
There were an issue that the CUC pub GUI cannot be accessed its giving 'HTTPS 404 error'
while checking the services via CLI it found Tomcat service down, it start running after reboo...
Hi
VG 248 firmware 1.2.1
analysis1. Verified the following, found that the status of the log level is in Trace level2. Although it is peak usage time and almost all the resource are utilised, but CPU utilisation is 40% and memory utilis...
HiCould anyone share SQL query that can be used at the command line to find all phones in an unregistered state and the last time it registered to the Call Manager (MCS)
So Happy to inform you that I was stuck with B2B call from Video Endpoint to (both MX300 and SX 10) webex cloudThis info shed some light on the same and I am able to fix itThanx Pauo!
Check the latest back up for all the below server and as mentioned by the customers, the latest back up is avaialable the reachability of the new NTP server Made the changes of NTP server reference in the following servers as Primary NTP server with...
Pre-change tasks and system health checksDNS change Before the configuration it is highly recommended to ensure that the prerequisites are met.Step 1. Check DNS configuration.Run these commands from CUCM CLI to ensure that DNS service is configured a...
Pay attention to certificates. If your CallManager certificates currently have IP addresses in them, they will need to be regenerated with FQDNs. You need to do this one server at a time and reset all phones after each server, then verify that they a...