Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello there,We have just migrated to a VoIP solution and are seeing a few issues with traffic traverses the LAN/WAN. Basically the 'brains' of the solution have been implemented at our DC and the remote shelf at a location. The DC has dual WAN links...
We have a Cisco 3750 stack set up as layer 3 with mulitple VLANs and EIGRP and ip routing. Also connected to this stack are a SAN as well as downstream 2960s. The 2960 are configured with the DG as the 3750 as are all devices and hosts on the networ...
Hello all, I have a scenario whereby, we are looking to roll out a solution offering our locations local internet break out locally rather than through a Centralised model. Most locations have a Cisco Layer 3 switch and a firewall which in turn con...
Hi all, We have two Cisco 6509s one of which has a NAM module installed. There is a SPAN session configured to monitor all traffic on the local 6509. How do I configure the NAM / switch to capture data from the other 6509?
Hello.I have the following switch:Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(44)SGcisco WS-C4506NAME: "Linecard(slot 1)", DESCR: "Supervisor II+ with 2 1000BaseX GBIC ports"I want to apply PBR to restrict ...
Here's part of the config detailing the networks, VLANs etc...Thanks for taking a lookinterface Vlan1 description LAN Subnet ip address 172.16.27.240 255.255.255.0 ip helper-address 172.18.202.3 no ip mroute-cache!interface Vlan2 description Wired DH...
Thanks for the reply. From a liablilty perspective, the true IP address of the user has to be forwarded to the cloud based filtering services we use for reporting purposes. Will this not NAT the IP address to another IP?
Thanks everyone for your responses so far.I apologise for not mentioning that both wireless networks work fine.If you login locally to any user laptop, not on the domain, you can connect to the External wireless SSID with no problems.As soon as the u...
