Dear All , I have a MDS 9216 connected to an MDS 9124 . The connected ports are showing as E Ports and not TE ports . What do I need to do to get them in TE mode of operation . MDS 9126  fc1/2 --------------------- fc 1/3 MDS 9124 MDS9216# sh int fc ...

Hi All ,Very frequently on while trying to log in to the UCS after typing in the correct username and password we are gettign the following error message : "Failed login info: User Reached maximum session limit."This is temporarily resolved by the fo...

Hi , I am not sure if I am missing something here , but could anyone tell me why a few VLANs have port associated with it while a few dont . For eg. VLAN 100 says active but does not have any members , if I do a "swithport mode access 100" on a parti...

Hi All , Could you please let me know if we require licenses on the UCS system for FC Feature to work .  All I have in licensing screen is :I  have pair of 6120'sucsm-1-A /license # show usageFeat Name                      Scope Default Total Quant U...

Hi All , Could someone please explain what the following means in the GUI Configuration guide of UCS @ http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.pdfUplink Fibre Chann...