About mcardell

mcardell · 06-08-2009

Good morning,my customer has an area covered by 3 AP and all the 26 users are joined to only ONE AP. Is there any option to force the client to distribute across different AP. Customer is using WLC and WCS in a LWAPP environment.I thought the only cr...

mcardell · 02-01-2006

Good morning,I need an IOS running on 2610 (not XM) supporting ADSL.Also if the IOS version is deferred it is not important because it is for testing purpose.My problem is that I need to respect the memory requirements:Flash 8 Mbps and Ram 32.Can you...

mcardell · 12-02-2005

Good morning,I am thinking to implement policy-based routing in my network.I am sure that Cisco was not raccomending this type of routing before. The reason is that could create loop and it is not easy to maintain. But lately I have found few links t...

mcardell · 11-24-2005

Good morning,I am struggling to find the MTBF for the chassis of the 4500 on CCO.I found easily the info on the cards but not on the chassis.Can you help?

mcardell · 11-24-2005

Good morning,I am struggling to find the MTBF for the chassis of the 4500 on CCO.I found easily the info on the cards but not on the chassis.Can you help?

mcardell · 06-17-2009

we had it enabled and the issue was still thereSo we disable it to simplify settingsI would still expect the clients to associate to the closer ad stronger AP

mcardell · 06-17-2009

Yes they both joined the same controllerThey are distributed across the floor in an equal distanceNo WLAN overideNo sniff done...

mcardell · 06-17-2009

Yes they doAs soon I reset the AP with most of the users the clients redistribute themself across all available APs

mcardell · 11-24-2005

Thanks,Is there any CCO links available?

mcardell · 10-31-2005

Thanks,Have you got any link that can confirm it?If I do not have the card still I cannot really check it.Is the output you got from a 525 UR?

Member Since	‎11-04-2002 09:28 AM
Date Last Visited	‎03-28-2023 09:04 AM
Posts	115

User Statistics

User Activity

Clients joining only one AP when multiple are available

IOS for ADSL 2610

Policy-Based routing raccomendation

MTBF in 4500

MTBF in 4500

Re: Clients joining only one AP when multiple are available

Re: Clients joining only one AP when multiple are available

Re: Clients joining only one AP when multiple are available

Re: MTBF in 4500

Re: max number of Ethernet interface supported on 6.2(2)