I have an RV130W router which I want to use for time based access restrictions for a single host in the network. My setup uses three schedules as described below: Summer1 = All days, 8:00am - 10:00am Summer2 = All days, 1:00pm - 4:00pm Summer3 = All ...

I want to police a specific IP address at night but allow full bandwidth during the day. I would use a time based ACL in a class-map with IOS but I can't find a way to do this in the RV130. Does this capability exist?

I would like to get some input as to the best switch to use at the access layer. I am considering both the 6500 with a Supervisor 32 and the 4500 with a Supervisor 5. I am using the Sup 720 in the data center so staying with a single platform is appe...

Hello,I am looking for some clarification of CEF switching behavior when using the following topology. 2 layer 3 switches, A and B, directly connected via a dot1q trunk and 2 hosts, C and D, both connected to switch B. Host C is in VLAN 10, Host D is...

We are running an ethernet to the premise network providing ip voice, video, and data services. This works very well but we do not have a good solution to provide private links for our business customers. I am looking at using MPLS tunnels but becaus...