Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am currently experiencing an issue whereby I am able to connect to the SSL VPN service with no issue. When launching an rdp:// connection, the following happens:>Windows Remote Desktop Connection dialog box pops up warning "A website wants to start...
Hello all,I have just upgraded my company's Cisco ACS Solution Engine from 4.2.0 to version 4.2.1.15.4. The appliance itself has upgraded just fine - I am now in the process of trying to upgrade the Remote Agent installs on the Windows Servers on th...
Hi all,I'm aiming to achieve something so simple I cannot believe it isn't working already!Essentially I have a 24 port 3560 switch in our company DMZ. All ports on the switch are in VLAN98 (DMZ VLAN). A few servers with static IPs in the relevant ra...
Hi there,I am setting up an autonomous 1142 Access Point. The intended goal is to get it accessible though 2 SSIDs:Private: VLAN3 (our internal data VLAN)Guest: VLAN98 (our DMZ/Segregated VLAN)At present, our VLAN3/internal users get DHCP addresses f...
Issue was as follows:RA needed to be installed on Server 2003 DCs. As it was on 2 member servers the RA had the opportunity to poll Server 2008 R2 DCs - doesnt play happily with this version of ACS/Remote agentWorkaround was to install the RA on x2 ...
Just realised the pool is a bit backwards so config has changed a bit.Have opted to have the whole 192.168.98.0/24 subnet in the pool and have excluded 192.168.98.1-192.168.98.199 as below:no ip dhcp use vrf connectedip dhcp excluded-address 192.168...
