About Marc_Lalonde

Marc_Lalonde · 03-23-2023

Hello all,I have a bunch of switches C2960 at work and I can connect to most except 2. I can't even ping them. The thing is, I have the same setup procedure for all switches so I don't understand where I went wrong on this one.No SSH, no ping, no tel...

Marc_Lalonde · 03-17-2022

Hello, I have different printers that we need to be contacted from an outside IP range. They way I set it is through Port Forwarding, like this example:External Service (PRINTER4) / Internal Service (PRINT) / Internal IP Address (x.x.x.x) / Interface...

Marc_Lalonde · 06-08-2021

Hello, We are currently using an RV325 for our Internet-facing router. There are a few port-forwarding rules and firewall rules on it. We also have a single DMZ IP configured on one of the RV325's ports. We also have a Meraki MX100 for our VPN needs....

Marc_Lalonde · 05-26-2021

Hello, I have created quite a few port forwarding rules on our RV325 so that an external company can communicate with devices on our network.For example: From outside, communicating on port 5150 forwards to a printer on port 9100, or on port 5151 fo...

Marc_Lalonde · 02-22-2021

Hello, I am trying to create a new local VLAN (meaning it will not connect to internet) which will span over 2 switches.We have 3850 routers and a whole bunch of 2960s but I only need the VLAN on 2 switches. So I connected to the router and create th...

Marc_Lalonde · 04-17-2023

@MHM Cisco World I guess you forgot me

Marc_Lalonde · 04-06-2023

Bump (if this is allowed)

Marc_Lalonde · 03-31-2023

Thank you for this @MHM Cisco World .The command "no autostate" does not work.Port Gi1/0/28 is already on vlan 30."ip default-gateway" is on 192.168.30.1, the same as all other switches.I have validated that on our main router, VLAN 30 is allowed on ...

Marc_Lalonde · 03-30-2023

Here's a schematic explaining quickly the layout of my switches. One PC on subnet 192.168.10.x can connect to all switches except SPYS1-SW11. Another PC on subnet 192.168.30.x can connect to all switches.It doesn't matter where the PCs are connected....

Marc_Lalonde · 03-28-2023

I've tried to issue the following command without successtraceroute 192.168.30.1 source VLAN 30It's as if it's expecting an IP address for the source instead of a VLAN number

Member Since	‎02-10-2021 12:35 PM
Date Last Visited	‎05-09-2023 02:44 AM
Posts	30
Total Helpful Votes Received	10

User Statistics

User Activity

Can't find why switch is not accessible through SSH

RV340 Port Forwarding from specific IP range

Replacing RV325 with Meraki MX100?

Port forwarding on RV325

Local VLAN between 2 switches, no internet connection

Re: Can't find why switch is not accessible through SSH

Re: Can't find why switch is not accessible through SSH

Re: Can't find why switch is not accessible through SSH

Re: Can't find why switch is not accessible through SSH

Re: Can't find why switch is not accessible through SSH