Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Although the fans appear to be fine I receive the following message :"Fan sensor fell below threshold of 0 rpm. The current value is 0 rpm".Is there a patch for this error ?
On a 3660 router , I can define ds0-group 0 to 30 continuously which willgive me 1 signalling channel and 30 voice channel. for example : 3660(config)#controller e1 3/03660(config-controller)#ds0-group ? <0-30> Group numberwhereas on a 2621 the IOS...
I have a set of VLANs for one group and another set for a second group.I need to keep these 2 groups seperate from seeing one another while also enabling routing and HSRP within each pool across the two 3550's.Unsure of simplier way than resorting to...
Hi Patrick,I have applied the config and receive the following for www access from 152 to inside.SydDPixFW01(config)# 106011: Deny inbound (No xlate) tcp src 152:10.42.152.2/1835 dst 152:10.41.81.27/80106011: Deny inbound (No xlate) tcp src 152:10.42...
Hi Patrick,Thank you for your comprehensive reply. I am keen to make the changes but just a few questions before I do.The aim of the firewall is to protect the internal (inside) corporate LAN from these new Test Lab (152,152,154) networks. The Test L...
Hi Patrick,I am also attempting to connect a Test Lab (security0) to an Internal Network (security100) for Internet connectivity. I have tried just using access-lists and access-groups as well as the static command with no success. Question : If I on...
I am running cue 1.1.2 and your right the clock syncronisation defect is fixed. One issue is one CME (ntp master 1) the timezone is AEST (Australia) and on CUE I configure AEST for timezone (also tried Australia/Sydney) but when I do a sh clock on CU...
I couldnt search on either of these 2 bugs.Sorry -- The defect you have requested CSCef33394 - cannot be displayed.This may be due to one or more of the following: The defect number does not exist.The defect does not have a customer-visible descripti...
