Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,the anyconnect client 2.2x is able to connect to an ASA (8.03) with TLS or DTLS. However, connecting via DTLS, it looks like that the compression is not working. Simply disabling DTLS and reestablish a svc session with protocol TLS, the compressi...
Hi,I'm looking for some details about error messages on a VPN Concentrator. They appear from time to time. I would like to know what causes this problems. Just to complete, they appear on different Concentrator models (version 4.x) with different Cis...
Hi,I'm experiencing some small problems with a pix 506 v6.3(4) and a 2924c-xl switch.On the switch port to the pix, many input errors and runts appear. On the pix, there is a VLAN configured and the trunk port is configured as mentioned in the Pix R...
Hi,We are having a problem on systems with the VPN client.On startup the application event log shows following error: TrueVector driver: Driver install or load failure: LoadNTDeviceDriver. Win32 error: The system cannot find the file specified.Browsi...
Hi,I recognized poor performance when we use the Cisco SSL VPN client. Download a file from the cooperate network has only half the speed of a VPN connection with the standard Cisco VPN client. Same client PC. Anyone noticed the same ?b.t.w SSL VPN c...
Hi,Thanks for the info.I downloaded the error messages. However, a recommendation like verify ipsec configuration is not very helful. As mentioned below, the messages appear only time to time. And in general, the most users dooon't have any prooblem....
WOW,indeed on the switch is a slightly older version running 120.5.2-XU. There are no IP phones behind that, and as far as I know there are no performance issues.I did check the bug tool but obviously with the wron keywords.You made my day. Thanks a...
Hi,I'm not an expert for the ACS but when you look into System configuration you will find the feature 'Database Replication'. With an eval version you should be able to test this feature.Cheers,
