Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning all - I'm trying to setup an Internet VRF with two separate providers; each provider will terminate on different PE. I would like to place customers in hanging from a CE into this VRF for Internet services. For simplicity, I'll redistr...
Greetings all - I want to restrict the access to specific MIB trees; however, the list seems to get bigger and bigger. We have a lot of routers and doesn?t clutter the configs with include lists. Here's my question: Is it possible to tell the route...
Greetings all - I'm trying to setup an AToM environment for traffic between a PVC and Ethernet. I have two 7609 with SUP720B. Is this possible with SUP720s and do you guys have an exampple?FR-DLCI600 <--7609<-MPLS-->7609--->EthAny suggestions great...
I have enclosed a drawing depicting one side of our network. I have an OC3 that terminates on the 7600 router with multiple PVCs, some PVCs (DLCIs) need to terminate on X-G1 router. The easy solution is to place another Flexwan module with OC3 on t...
Greetings, We're running hybrid mode on our 6500 switches. I have noticed lately access-class on vty line 0 4 does not apply to someone sessioning in from the switch (session 15 or 16). Is there a way to block users from sessioning in on the router?...
Totally agree with you however, we have a different group that maintains the switching portion while my group maintains the routing portion. Unique but it proves successful for us.... One of the main reasons we're running hybrid mode.
Leo,You don't have to be physically at the switch to session into the MSFC, you can do that from anywhere as long as you have telnet access to the switch. You might be thinking of "switch console", in order to console into the MSFC you have to be ph...
Greetings all,The way we fixed this problem on our network was to deploy Novell's Compatibility mode servers. We placed one on the outside nterface, another on the inside interface. The servers did the IPX/IP conversions. Let me know if you need mo...
