About Daniel Castro

Daniel Castro · 11-04-2010

Hello,I configured a static NAT from the WAN to a private IP (192.168.2.5) on the LAN. I have used a WAN IP dynamic.interface Vlan1 ip nat inside ip tcp adjust-mss 1398 ! interface Dialer0 ip nat outside!ip nat inside source static 192.168.2.5 ...

Daniel Castro · 10-06-2010

HelloWhat is the OID of the noise margin for the cisco 878?I have found in the MIB of router the parameter hdsl2ShdslEndpointCurrSnrMgn but the snmpwalk query does not match the show controller dsl 0!Any ideas?PD:# show controllers dsl 0Transmit Powe...

Daniel Castro · 06-16-2010

Hello.I've been looking a lot, both at google and on this forum, but I can not find the solution. I can not configure a router 836 on a ADSL over ISDN line .The company is Jaztel ISP, PVC 8 / 35 PPPOE.The CD Led is on, but the PPP not.Thank you.Regar...

Daniel Castro · 11-27-2015

Hi Shane, Could you finally reboot individually every stack switch in order to apply the MTU? Thanks.

Daniel Castro · 11-05-2010

Hello,First, thanks for answer my question.I can't understand that a zyxel can do a static nat against a firewall, and in the same time answer requests DynDNS.And however cisco can not perform a ping. The problem is that the machine with IP 192.168...

Daniel Castro · 06-18-2010

Thank you! This configuration works perfectly!Regards.

Member Since	‎06-16-2010 08:37 AM
Date Last Visited	‎04-05-2018 01:18 AM
Posts	6

User Statistics

User Activity

Static NAT from cisco 878, but not ping for cisco!

OID noise margin cisco 878

Cisco 836 ADSL over ISDN

Hi Shane,

Re: Static NAT from cisco 878, but not ping for cisco!

Re: Cisco 836 ADSL over ISDN