Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a design question more than a troubleshooting question and I hope you can help me with this or point me to a good resource where I can get this clear. My topology is very simple:Local Network => ASA => Router => InternetThe idea with th...
Hello,My call center is running VoIP services and some phones randomly reboot from time to time. We are using Polycom 331 phones plugged into 2 PoE cisco switches. This random reboot affect 2 – 5 users per day and it seems to be no pattern.By the w...
Hello,I have a problem to figure out how to configure a backup route to the internet. My client has 2 ISP and basically they want to use 1 ISP and in case the ISP fails, use the other one as backup route to the internet.The topology looks like the o...
Hello,I will try to describe my problem as best as possible. The title says VPN clients cannot access DMZ network, but that is not exactly the problem, the situation is this, a group of users are using an actual 10.x network where they have their ser...
Hey, thank you very much for the quick reply. It makes total sense and it is indeed very easy. I was kind of lost in the fact that I should NAT the whole IP address or just a portion. Thanks again!
Thank you very much Paolo. I have been working with the vendor and all they do it's to update the firmware version on the phones, but I want to check everything and make sure there is no misconfiguration on our internal site that might be causing th...
Hello Rick,One question regarding operation. If "ip route 0.0.0.0 0.0.0.0 G1/0/1" and then "ip route 0.0.0.0 0.0.0.0 G1/0/2 100", that means that I have to wait for failure on G1/0/1 in order to use G1/0/2, but what if G1/0/1 never fails and what ac...
