Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have Pix2Pix IPSec which works fine but there are some routing issues. Pix 1 inside - 192.168.31.1 Pix 1 outside - 172.16.1.2 Internet (IPSec tunnel) Pix 2 outside - 172.17.1.2 Pix 2 inside - 10.51.2.2 Router at site 2 (eth0) - 10.51.2.1 Router at ...
I have Pix2Pix IPSec which works fine but there are some routing issues.Pix 1 inside - 192.168.31.1Pix 1 outside - 172.16.1.2Internet (IPSec tunnel)Pix 2 outside - 172.17.1.2Pix 2 inside - 10.51.2.2Router at site 2 (eth0) - 10.51.2.1Router at site 2 ...
Harold,In the following example:"tag-switching advertise-tags for tdp_networks to tdp_neighbors"I do see why one would like to limit the tdp_neighbors (create such access list), but what is the performance impact of permitting all networks to be adve...
Possibly obtaining AS number and PI (provider independent) IP addressing space plus configuring some form of BGP load balancing.It is *** VERY *** unlikely that you need the full Internet BGP routing table.The BGP routes necessary for some decent loa...
Well, I cannot think of any downside.Make sure you have the requested minimum RAM and flash memory.Advantages of having CEF enabled:http://www.cisco.com/warp/public/cc/pd/iosw/iore/tech/cef_wp.htm
Can you please provide some more info.What are these interfaces - Serial/Ethernet?Static v/s Dynamic routing?What kind of ISDN backup is this - Backup Interfaces, Floating Static Routes or Dialer Watch for DDR Backup?If you can provide an example wit...
What aboutip route 10.0.0.0 255.0.0.0 Null0ip route 127.0.0.0 255.0.0.0 Null0ip route 172.16.0.0 255.240.0.0 Null0ip route 192.168.0.0 255.255.0.0 Null0I agree that "access-list" gives you the option of logging, but what do you think will be the pros...
