Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have at work a Pix 515E utilizing s/w 6.3(4) - all 6 physical interfaces are in use.I need to use the vlan support that the pix provides. What I want to know is whether I will lose any of the pix current config associated with the interface ...
Hello all,I am testing isdn connectivity from 2 remote routers. The problem I am experiencing is that once the isdn call to the remote router has been established I am unable to ping the remote isdn ip address & I am also unable to ping through the i...
Hi, I have a cisco 7200 that is receiving valid broadcast packets from one cable modem but does not seem to pass the packets to another cable modem segment.Can anyone please tell me what I should be looking for or what needs to be turned on / off. At...
Hi, we have a pix 515e which has been in production for a year with 64 meg memory.We have noticed last week that users coming off this pix were reporting intermittent connectivity problems.All diagnosis pointed to extremely low values for free memory...
Hi S Premkumar,the router config is large - pls mail me your e-mail address & I will contact you. I am not sure if your e-mail address on your profile is correct ...JSMRegardsLincoln
Hi S. Premkumar,to bring up the isdn I do an extended ping using the source ip address of 192.1.1.1 & destination address of 1.1.1.1Once the isdn is active I then try an extended telnet using 192.1.1.1 (F0/0) as the source interface ...RegardsLincoln
There is a new server / client installation that uses initial broadcasting & then uses a tcp port for comms. If the server & client are placed within the confines of the same cable modem this installation works ...Lincoln
Hi Nadeem,this pix is running OS 6.3(3). The xlate is showing me 9 in use, 27 most used & the sh conn cmd 21 000 connections.I am really confused because no new customer has been added & the config is the same since May this year. What I do notice un...
