Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody,I have a couple of ASA 5520 running image 8.2(1) in active/standby failover mode.Some month ago I downloaded the 8.2(2) from the cisco site and loaded it to the ASA.After the loading of the new image, they called me for problemsconce...
Hi all,I have configured my pix 515e 7.0(4) as a VPN concentrator.The connection works, but the VPN stays up for a period that can befrom 20 minutes to about 2 hours.The pix interfaces are connected to a L3 switch Alcatel 7700, 802.1q vlan are conf...
Hi all,I want to upgrade my 7200 ios from the image c7200-is-mz.121-14.E10.binto the newer c7200-is-mz.123-20.bin and the problem I'm facing is thatafter i boot with the 12.3 all of the ATM interfaces remain down down.I wonder if newer image require ...
Hi all,I have a remote office with four bri connecting to two pri on the remote site.As a reference I used "Cisco - configuring MPPP for multiple bris using rotary groups"and I had no problem on reaching my goal.Now the problem is that the router kee...
Hi everybody,I have a router on a LAN acting as a gateway and DHCP server.One host (it's a Nortel PABX) on the LAN need not to receive dhcp reply to function properly, and couldn't disable it to send dhcp request .I tried to filter traffic originated...
Hello Todd,it's a web application you access with just the Internet Explorer broser.The problem is: I load one record of the DB, then if I try to modify some of the fields,when I give the OK to apply the changes, it just ignore it.The problem rised w...
Hello,I don't think there is a procedure to let the users change their own password on the ASA local DB.You can find this option with the UCP application in the Cisco Secure ACS,and if you have more then few users to manage, I think you need some RAD...
Hi Sandy,can you post a show ver of your pixes ?What release do you want to upgrade to ?Have you already got the images ?http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtmlHere you can download a good freew...
Hi Brandon,it is important to know what version are running your ASAs [ie 7.0(4)] and to collect some log, you can set it to error level (logging buffered errors), with the logging standby, so all of the message should be replicated on the standby un...
Try this:http://www.amazon.com/Complete-Cisco-Configuration-Networking-Technology/dp/1587052040/ref=pd_bxgy_b_text_b/102-6156260-7032959It's an excellent resource for anyone looking for a reference book on VPN with Cisco device.Regards,Marco.
