Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I have a Location where it's not possible to get Network via cable so i was trying to Setup a AP in Bridge mode to cross the distance but after putting the AP in Bridge mode he couldnt join the WLC anymore.
After searching for the error i fou...
Hello,
i have to deal with a new rare situation.
I have a /23 subnet in which all our Servers are located.
A few servers have really high broadcast traffic, which as the admins told me cannot be changed server side.
Usually i'd just create a seperat...
Hello,
i'm having issues configuring one of my APs in Bridge mode.
After switching the mode to "Bridge" the AP cannot join the WLC anymore. (added the MAC of the AP to the AP Authorization List)
But to start out, here a Little Setup of what i'm try...
Update: The issue was that my Modem/Router Linksys E300 (DD-WRT) wasnt configured correct for multiple private Networks for one public IP.
After I added the configuration on there it works fine now.
Hello,
I'm trying to set up a test configuration ...
Hello,
i created a VLAN für test purposes.
I want to secure this VLAN with ACLs lateron.
(havent added any ACLs yet)
since a lot of productive Systems are running in the Network i didn't want to try around too much on the core Switch at the moemnt....
Mesh and Multi Country is only supported on 8.1 or higher.
I upted my WLC and now it works.
Ps. updating on 8.3 broke my Guest Web authentication so i will try 8.1 / 8.2 later and see if i get both to work on one of those versions
Hello,
I updated to 8.3 and it works.
That said, the Webauthiaction for Guest WLAN was not working after the update to 8.3, ill maybe try 8.2 / 8.1 later and see if both work on one of those Version.
Ill Report back when i tried.
Thanks for the h...
Hello Scott,
thanks for the help, i guess i probably will have to get seperate Controllers for every Region.
I think i have a 2nd 5508 around, i guess i have to look about licences tho.
Is there any other method to get my Network there untill i hav...
Hello Scott,
i deleted the "mesh_port_cfg.txt"
from the AP Flash, but in bridge mode it is still thesame as above, resetting to factory Setting doesnt help aswell.
The Point is it join the AP successfully in local mode only in bride mode ist doesnt...
Hello,
the servers i want to limit are virtual in a Blade, i dont want to limit the uplink to the blad itself if possible becasue a lot more stuff is running in there.
I'm trying to find something to reduce/limit the BCs from only those specific IP...
