Hi,We recently implemented Cisco 3850 switches and we are observing huge discards on the interfaces. I have below default configuration but not seeing anywhere applied. show policy-map Policy Map system-cpp-policy Class system-cpp-police-data...
Hi, I have cisco ASR 1002 X router with 1000Base SX SFP MMF and Cisco 3850 switch with 10GBase SR SFP+ MMF Now, I want to connect router to switch with the use of this modules. when I connect I am unable to see link status up.what are the p...
Hi, I got cisco 3850 2 switches and connected in the stack.It's observed that the version of the switches stack-ports is different. Is there any issue and how to update it. Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ----...
Hi,
I have 2 locations with same ISP provider and having advertised our own Public pool in both the location. We configured BGP prepend and its working fine from last 5 months.
Suddenly its observed that from few internet providers the trace is goi...
Hi,
I have ASA 5520 in my office and we are observing interface errors in LAN int gi0/2. How to fix this input errors on the interface.
I enabled flow control but still observing input errors and causing packet drops.
I am not sure what causing drops...
Hi,I have discards but not like now. Now i am seeing huge discards on most of the ports which are connected to KVM, ESX or DBGi1/0/18 2669491 0 138 7753Gi1/0/19 2638140 0 138 7752Gi1/0/20 247496132 2373205 4332 0Gi1/0/21 1723863386110 6453774374 243...
Hi,I have DB Server, KVM, ESX and i see even in one of the KVM which is not in use.sh verCisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.8, RELEASE SOFTWARE (fc3)Gi1/0/18 2669491 0 138 7753Gi1/0/19 263...
Hi Sumanth,My Observations :1. Both sides showing down / down but on cisco 3850 its showing down/down not connected.2. When i connect the same ports in other switch and cisco ASR 1002x its working fine.3. I Tested with fiber meter and observed that w...
Hi Sumanth,I connected the same kind of modules at cisco 1002x and cisco 3850 switch (its has 1gig and 10gig support) but link isnot coming up.At switch end, it is down down (not connected) and media type is not showing anything. On router end its go...
Hi Summant, I connected 1000Base SX SPF MMF card on both cisco ASR 1002 x and Cisco 3850 switch. But still, ports are showing down.Also, it's observed that at the switch end its showing as not connected.I changed speed 1000 but no luck. Regards,Santo...