Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,allI need to protect 6509 with 6724-sfp module from loop. So I want to use storm control. But cisco said:When multicast suppression is enabled, traffic storm control suppresses BPDUs when the multicast suppression threshold is exceeded on these m...
Loop occured in my network.After I sh int , I have some question.Almost all input packet is broadcast,so where is multicast ? Does the number of broadcast include multicast ?thanks!switch#sh int g2/24GigabitEthernet2/24 is administratively down, line...
In my lab,I don't know why 6.2.1.0/24 is redistributed into ospf 2,and 99.128.1.0/24 doesn't. From cisco document:http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml. Cisco said "Note: The mechanics of route redistribut...
thanks for your guide. It have relevance.I think that "ip route ... interface" in CISCO is special static route. In my lab,6.2.1.0/24 is one route in OSPF 1 because CISCO think this route is connected route in OSPF 1 domain. So it was redistributed i...
There isn't any other routers in my lab. "99.1.133.230" and "99.129.1.1" is the same router.You puzzle is for me,too.230#sh ip ospf da ex OSPF Router with ID (99.1.133.230) (Process ID 2) Type-5 AS External Link States LS ...
thanks for your reply.You mean that %SYS-5-RESTART would be later about few minutes than uptime. But my router's uptime is Jun 3 2007,and %SYS-5-RESTART is Sep 12. They are very different. I don't understand what reason will reset %SYS-5-RESTART and ...
