i designed a network with link aggregation as shown, but there is link agregation problem i.e. link is getting down while removing one of the port on link aggregation.
waiting for support
we have 1832 wireless environment, and now need to additional aps, due to eol we can not by 1832 aps.
therefore we are panning to buy catalyst 9115 ewc and use on same environment with 9115 ewc.
@paul driver
while i removed the one of the lan cable connected with port-channel on L2 9300 switch to active L3 9600 switch, then the connection is down for 5~6 seconds, and there is no down time while I removed the lan cable connected to standby L...
I will check the detail log, but while i removed the one of the lan cable connected with port-channel on L2 9300 switch to active L3 9600 switch, then the connection is down for 5~6 seconds, and there is no down time while I removed the lan cable con...
@Rich R
Thank you for your kind reply, I had already tried "no service call-home", the problem is as same as you mentioned, after reboot it will again appeared, and then after I am using logging discriminator. My need is, If possible I just want to ...
@balaji.bandi
i think there is no problem on ap tagging and ap join, the problem is on mobility.
and result of "show ap tag summary"
#show ap tag summaryNumber of APs: 2AP Name AP Mac Site Tag Name Policy Tag Name RF Tag Name Misconfigured Tag Sou...
