Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an CC AI-RRM driven WLC allready working in non-provisioned mode. My question is how to move the WLC to another CC. The custommer will migrate from one to another one. No upgrade but migration to another one.
I think so, but I'm not sure. Onb...
C9800-40 17.12.x, C91xx local mode, EAP-FAST authentication to C9300 with a MAB fallback.
After some weeks or months some APs failed to authenticate themself to dot1x secured LAN. Typicaly after an upgrade some APs are lost. ISE reports:
Event 5440 E...
9800-40, 17.12.3, 1000 AP, 4 sites
I would like all APs to detect rogues but only a subset of them to perform a rogue containment. For example one site is more open and public so we are not alowed to contain rogues while another one is closed and pri...
We have about 300 branch offices with 1-50 flex connect APs. Most of them has 1-4 APs. Should I configure an unique site tag for each office or can I combine branches into a smaller number of site tag and not to exceed the maximum of 100 AP/ST ?There...
Hi all,I have several outdoor AP delivered in a MESH mode. I am not going to build a MESH network I only want to onboard the AP and convert it to a local mode. So I don't want to configure MESH AP join profile and site tag.It was easy in the AireOS. ...
Hi, The creds are in the Site TAGs on the WLC. The WLC serves about 1000 AP but 400 of them got wrong and ISE reports bad password. Rejoin and reboot AP solves the problem with no config at the WLC.
