The switch is running 15.x Enterprise Services image. I found a related article from the link below but it is old and does not include info on the 4900M switches.http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/41263-...
I'm little confused with SFP requriement for the old and new verison of 3750-24FS switch. Can someone verify my findings below?WS-C3750-24FS-S (24 built-in MT-RJ FX fiber ports (no SFP here, can someone verify?), two SFP slots for standard SX/L...
Do 6500 series supervisor engines have a model that can create SVIs with 10G bandwidth? We are uplinking data center access switches to the distribution switches using 10G transceivers but the we end up with 1G routing speed between the SVI vlans cr...
I would like to implement DHCP snooping on APs, similar to the snooping on the 3560 switches. I could not find any documentation on this topic. Can anyone give me a pointe? Thanks.Jim
I have the same problem and found these links that provided answers:http://forums.cacti.net/about29656.html&highlight=http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23738165.htmlVlans on 3560s, 3750s and 3550s do not show sta...
Thanks for the quick reply. I agree with you they should work. However, do you know anyone who has tried such setup, which will cost us $4000 for a single connection? Just want to protect our investment.Thanks.-Jim
I guess I should look into Nexuss 7000 platform for higher bandwidth support. I agree with you 10G is achievable only if 10G is implemented host to host. Thanks again.-Jim
Hmm, we are using EIGRP. Isn't true interface bandwidth, configured or default, and delay are the two main factors determining the path to a destination? This means the default SVI bandwidth number matters. I can easily change the bandwidth statem...
