Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a new setup consisting of a Call Manager v4.1.3 and a 2811 voice router with an NM-HDV2-2T1/E1 two port PRI ISDN card. The outgoning calls initiated from any IP phone to all destinations are all right, but incoming calls terminate with an unkn...
There is a 2811 security router configured and there is a web server behind, accessible from the internet.We want to make stress test from the internet to the web server to see where the router and the webserver pair has their limits. However the rou...
I have some WS-C3560-48PS-S switches with 1000BaseT and fiber SX gigabit SFPs connected to a server farm switch WS-C3750G-24TS-E. Servers are attached with gigatbit-capable NICs.I found extremely sluggish performance when installing Windows XP to new...
Hello,Thank you for your input.I tried two other IOSs but was no help.Finally, the PTT (T-Com) changed their ISDN PRI signalling somehow and it solved the problem, now works fine with incoming calls also.It was not easy to have them do it...Regards,L...
New discoveries by myself: the stress test was not stopped by the IPS function, actually it has been stopped by the IOS firewall's maximum TCP incomplete TCP sessions to a host" function and access to the host was banned for 10 minutes completely (in...
Are there any show commands on the 3560 switch that would display the actual usage and the overload of that queue (on a port) and that drops take place? Could not find any.Thanks
Hello,Yes, I have inputted the "mls qos" command in both the 3750 and 3560 switches, no any other qos measures. I run IP telephony (Call Manager) on the network also. Thank you for the advice, I will try the scenario without "mls qos" and I might not...
