We are running a collapsed core so the closet switches are directly connected to each core switch via a layer 3 point-to-point link.The closet switches are in OSPF area 1 as are their links to the core devices.The link between the core devices is in ...

What is my Tacacs/aaa configuration missing?It never tries to authenticate to the serverI am running nexus-1000v-mz.4.0.4.SV1.3b.binaaa group server tacacs+ TacServer    use-vrf managementaaa authentication login default group TacServeraaa authentica...

I have a router that is running both BGP and OSPF.BGP is learning the default route from its BGP neighbor.I was going to redistribute the default route into OSPF with a route map and the “redistribute” command but I noticed that once I configure...

We have about a dozen VG224 located at a site using MGCP.The problem is, initially the gateway will register with CCM but over time various ports on the gateway will lose their registration with CCM. Users will complain they get no dial tone from the...

Will this work for an OSPF configuration?network 10.1.0.0 0.0.255.255 area 0network 10.1.5.0 0.0.0.255 area 1In other words will the more specfic wildcard take priority ?Thanks