YC2
Level 1
Level 1
Member since ‎12-27-2021

User Statistics

  • 38 Posts
  • 1 Solutions
  • 0 Helpful votes Given
  • 50 Helpful votes Received
Recent Badges
First Discussion
40 Helpful Vote
50 Helpful Vote
5 Discussion Posts
5 Helpful Vote
30 Helpful Vote
30 Discussion Posts
25 Helpful Vote
20 Helpful Vote
20 Discussion Posts

User Activity

Does anyone have any practical experience with 9300 (non L, non X) switches and the short 30cm stackpower cable? The stackpower cable is only available in 30cm and 150cm. That's a big jump. Some of our switches are 4u's apart. The rack is organized l...
On the physical phone, if you go through the settings menu > ethernet configuration you can change the switch port config default from auto to 10 half, 10 full etc.Is there any way to do this through webex admin dashboard? I see other ethernet option...
Running 16.12.05b if that makes a difference.Config guide First time using LLDP. The configuration guide has me believing that you have to do lldp run to enable it globally, then lldp transmit and lldp receive on the desired interfaces. It appears "l...
We are making the transition from TEAP (Cert machine auth, MSCHAPv2 User auth) to TEAP (Cert machine auth, cert user auth). ISE 3.1 Patch 5. Windows 10 22H2 clients. Ran into a snag. If I logon to a machine configured for mschap for the second phase,...
We have a 5520 running 8.10.183.0. Noticed some odd gui access behavior. If the controller has an interface on a vlan, and I try to access the controller gui from a WIRED client on said vlan, it will time out. Yes the vlan has a route to the controll...
Community Statistics
Member Since ‎12-27-2021 12:17 PM
Date Last Visited
Posts 38
Total Helpful Votes Received 50
Helpful Votes From