Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is the case. I recently installed a CUE. The CUE brings a default script which I belive is not funtional for the porpouse of the company I work for. I started writing a script which would allow me to dial the extesion number I'm trying to reach ...
Here is the scenario:I have a branch office with an ISDN line as backup line and a PRI T1 line in the HQ office. When the branch office's frame relay link goes down, the router automatically dials out to the HQ office using the ISDN line. After diali...
Here is the scenario. We have a customer who has tow routers connected to an ATM cloud via an OC3 interface, and around 200 remote offices connected to the central office via Frame Relay data links (all of then). Recently, our customer implemented Vo...
Hi guys.I sold a CCX 9.0 recently to one of my customers. Is there any way to force to Outbound dialer to dial the 2 or 3 contact phone number right away instead of dialing all contacts first number and then dialing the second contact number in the l...
Taking into consideration that the only user that has access to the entire system is the Administrator; is there any way that a Supervisor can create or delete outbound campaigns instead of the Administrator?I have this situation with a customer. the...
I guess the two PBX are at different sites. If so, then you shoud be able to integrate them using two VG or two Voice capable router with analog or digital trunks.
Can you guys post an example configuration of this type of integration?I have an issue with the same scenario, CME 4.2 and Linksys Phone SPA922. I can make PSTN calls, but I cannot make internal calls between SPA922 phones.
Hi Kevin.Here you go, I'm posting the configuration of both routers and a debug file contaning the results of the communication between both routers.Thanks for your support.
