Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5516 and 2 Site To Site VPN connection (the connection in UP and work):first VPN IKEv1 - with network PEER IP 172.19.60.1/24 -> IP in my ASA 172.19.60.200and subinterface and VLAN 100 for internal access -> 172.16.100.1/24 second VPN IK...
Hi, now I am trying to build a S-2-S VPN tunnel between my cisco asa 5516-x and Azure VPN.The problem is that IPSEC needs settings:Encryption: GCMAES256Integrity: GCMAES256At Cisco, when I chose encryption: GCMAES256, then automatic Integrity value i...
Hi,I want to know if cisco asa 5516-X version 9.x support for IPsec encryption with AES-GCM and IPsec integrity with SHA-256, SHA-384 or SHA-512 for S2S VPN with Azure.
Hello,I have the following case: ASA1 has a tunnel made and NAT to another ASA2.I must add another ASA3 to ASA1, which must be tunneled and access the same resource from ASA1.Warnings: there should be no connection between ASA2 and ASA3 networks.How ...
Yes, 172.19.60.0/24 and 172.19.61.0/24 are remote networks (not local to your network). Thanks for the quick and accurate answer. I will add the new network 172.19.61.0/24 to the ACL and test the result.
Thanks, but I found this information on site of Microsoft Azure for Cisco ASA:Support for IPsec Encryption with AES-GCM and IPsec Integrity with SHA-256, SHA-384, or SHA-512, requires ASA version 9.x. This support requirement applies to newer ASA dev...
Hi, to add a new tunnel to ASA1, I need to use another physical interface of ASA1 or I can use the subinterface? Here's how the configuration is done now:!interface GigabitEthernet1/1nameif outsidesecurity-level 0ip address 100.100.100.10 255.255.255...
