Dear Community,We are currently encountering a challenge in accessing the switch command-line interface (CLI) using user credentials from the Active Directory when the connection between the switch and the TACACS server is unavailable (Cisco ISE). Th...
Dear Community,We currently utilize Cisco ISE 2.4 for TACACS implementation to authorize user access to network devices. We are encountering a challenge during the migration process from a Cisco C3900 router to a new Router C8300 while maintaining th...
I have a problem in BYOD when "Network Setup Assistant" run on Wired_802.1x Windows 10 Client, I got the error message "Failed to discover ISE Reconnect to network and try again", after troubleshooting and searching for the cause of the problem, I ...
Hello I have in my work Cisco ONS 15454 system with CTC launcher Applet v9.0 for monitoring, I tried searching on the internet for resources (courses, Training, Videos, Books) and I didn't find any, I want to learn this technology any one can help ...
I have this Cisco fiber switch (catalyst WS-C3750G-12S )and I want to upgrade the iso it has all fiber port and there's no USB port, how can I upgrade the switch only using a console cable I have an iso file on my laptop and I already installed tftpd...
Dear MHM,We appreciate your feedback and assure you that we will carefully consider your feedback to promptly address the issue at hand. I will keep you informed of the outcome. Thank you for bringing this to our attention Omran Mohamed
regarding redirection by the Switch, the client was actually directed to the Cisco ISE BYOD Portal and was able to access the web page and download the Network Setup Assistant.exe smoothly, also I tried to use Wireshark to analyze the packets but wh...
I'm doing only Layer 2 in untagged traffic, all Cisco ISE, Client PC Win10, WinServer2016 (running DNS, CA, SCEP RA, Active Directory), and the Switch in the same subnet 192.168.0.0/24,For testing, I made the ACL to permit all traffic, and all nodes ...
