Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have few clients finishing ISE auth perfectly fine from access layer, but DHCP not happening.Faults on Gi1/0/5:DHCPv4_DISCOVER_TIMEOUT[2766]One of them i noticed this while running "show device-tracking counters interface gi1/0/5" anyone knows what...
I have a new Cisco AP that does not pick IP from DHCP. Manually setting IP, Controller enables AP to work. Is there an option with DHCP for this to work? Wireless AP C9136I-ZCDP Extract from Switch##################Platform: cisco C9136I-Z, Capabilit...
Is there any way to go back from C3PL to legacy style? Is write erase, reload with backup config only method? Wanted to test config for few ports but i completly ignored the message clearly shown on CLI and copy and pasted a whole bunch of class poli...
I am trying to get some answers on 2 different networks with Thunderbolt 4 docks being used.SDA Network - Here if i connect my laptop, machine gets authenticated and also granted access. Even though i can see on network port multiple MAC belonging to...
AP now on same port as working AP, behavior same.[*02/19/2026 01:08:04.9396] chatter: Device wired1 notify up link DOWN[*02/19/2026 01:08:04.9446] Restarting DHCP client[*02/19/2026 01:08:08.9465] Waiting for preferred uplink IP configuration[*02/19/...
SSID? or AP yes Flex mode. But how is that related to AP not getting DHCP IP?switchport trunk native vlan 2switchport trunk allowed vlan <removed other vlan>,503,<removed other vlan>switchport mode trunkswitchport nonegotiateservice-policy output <po...
Yes have tried this and Laptop got IP from corp DHCP server.AP picks ip from DHCP server locally (direct attached L3 switch) but not centrally while port is in trunk, native vlan configured. AP picks ip from corp DHCP while configured as access port ...
Further UpdateTested configuring access port of AP2 as access vlan matching AP Management, AP got IP and registered with WLC.Moved port back as trunk and native. Stopped working..
Hi, did some further troubleshooting.. this are my findings.Sceanrio - 2 APAP1 >Access Switch 1(9300) > 9500 (Gateway) > WAN > DHCP , works fineAP2 > Access Switch 2(9200CX) > 9500(Gateway) > WAN > DHCP - This does not work.if i configure 9500 with D...
