Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What does the minimum software version for DNA Centre Supported Devices refer to?Is this the minimum version that all DNA-C functionality will be available from or the minimum version where a device can be discovered etc in DNA-C?For example if the m...
We currently have ASR1002-X's configure with GETVPN applied to the WAN interface within the Global RIB, is it possible to apply IPsec tunnels to interfaces residing in a another VRF?
The IPsec encrypted interface would be a sub-interface on the same...
Is PBR (Policy Based Routing) supported through CEF in the Cat 6509-E using Sup-2T supervisors, if so is there a theoretical throughput limit with this?
I wish to advertise routes between MPLS VRF's - I do not want to add route leaking on the WAN CE.I have 2 VRF's terminating on 1 x CE router, the CE the connects to another router with 2 x OSPF processes (1 each for each VRF). The 2nd router then red...
I have multiple sites each with 2 MPLS connections and all using BGP to learn routes from the VPN - is it possible to use IP SLA to restrict routes advertised from MPLS CE to internal routers based on IP SLA data such as jitter, error rates etc? ...
The CE will receive 172.16.1.1 via VRFA, this is then redistributed into OSPF Process 100. As the CE has an OSPF peering with Router2 within Process 100 this route is exchanged with Router2.Router 2 will then redistribute the route from OSPF100 to OS...
thanks for your response - I have added the extra keywords but no improvement. output belowDC-CE#sh ip ro vrf VFRB os 172.16.0.0/32 is subnetted, 2 subnetsO 172.16.1.3 [110/2] via 192.168.1.22, 00:00:53, FastEthernet2/0 192.168.1.0/2...
