Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hiwhen attemp to install Esxi 5.1 cisco image on UCS-B420M3 the following PSOD appearsVmware forums say the reason is related to disk controller and disk accessibility more information :Firmware versions:Applied Scrub policyLocal storage policyFlexF...
according to attached scenario i think FCOE NPV beside FC NPV should be enabledso which of the following licenses should be applied on FabricInterconnect device which is in NPV mode?FC_FEATURES_PKG or FCOE_NPV_PKGThanks
on attached scenario the FI is NPV enabled to be able to pass flogi to upstream core brocade san switchesthe question is does enabling npv affects negatively FI's functionality on Ethernet processing ? later 2* C3750 switch will add to the scenario w...
i read nearly 500 topic on antenna selection for high ceiling and industrial warehouse environments (~10m ceiling)Question1 : both ant2544v4 and Ant2524 has ~60 degrees Elevation plane 3 dB beamwidth does it mean this Omni antenna could be mounted ...
this document told ESXI 5.1 u3 has some problemshttps://tools.cisco.com/bugsearch/bug/CSCus51007/?referring_site=bugquickviewredir finally the ESXI 5.1 u2 successfully installed on all server baldes.thanks alot for helping
you could properly install ESXi (Cisco oem 5.1); meaning you see the SD card ?yes exactly, esxi 5.1 u2 , the u3 version according to cisco documentation cant see the SD card you did not install any fnic/enic drivers after the installation.yes i didn'...
Thanks Walter and Kenythe last message before PSOD was "loading module Enic"thats why i re checked the VNIC templates and uplink checking also correcting the uplink settingsfinally the ESXI installed on 1SD card module !is it logic ? !im using only o...
Thank you Sebastiancorrect and good points you mentionedmay i ask which model of omni antenna you used ? i hope can mount APs on ladder structure hanging from the ceiling ~2m lower the ceilingand for the site survey hmmmm not possible due to some non...
Thank you SebastianWill it be used for data/voice/location services?yes aim is to have unified wireless network to support Motorola Barcode laser guns,Cisco 7925G phones and some laptopsIs uniform wireless coverage needed on all the 10 m height (from...
