About zeenatkhattak33

zeenatkhattak33 · 03-01-2022

Hai I have two cisco 2960s switches connected on poe of other vendor switch on different sites. If one 2690s goes UP on same time other goes down vice versa, how i can fix this issue. kindly guide

zeenatkhattak33 · 02-28-2022

HaiI have issue on two access Cisco 2960 switches connect to Ruckus icx7150 by TRUNK port. Cisco's 2960 port blinks Amber even if I remove the cable,, while same connect port on Ruckus is down. If I reboot the Cisco's 2960 for some time its working f...

zeenatkhattak33 · 03-03-2022

GigabitEthernet0/1 is down, line protocol is down (err-disabled) Hardware is Gigabit Ethernet, address is f078.167b.9081 (bia f078.167b.9081) MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 ...

zeenatkhattak33 · 03-02-2022

only trunk goes down

zeenatkhattak33 · 03-02-2022

both switches are located locally. I can connect console to both switches.When simoultanously both switches dont goes up only one switch goes up...connect devices can communicate only but trunk port is down alway of down switch.............below stat...

zeenatkhattak33 · 03-01-2022

There are no redundent link only one uplink is configured as trunk...how Stp is blocking sir?

zeenatkhattak33 · 03-01-2022

Dear on both switches just trunk configurations are done.

Member Since	‎02-28-2022 11:16 PM
Date Last Visited	‎03-09-2022 11:01 PM
Posts	8
Total Helpful Votes Received	35

User Statistics

User Activity

Two switch 2960s connectivity issue

Cisco 2960 Switch Uplink issue

Re: Two switch 2960s connectivity issue

Re: Two switch 2960s connectivity issue

Re: Two switch 2960s connectivity issue

Re: Cisco 2960 Switch Uplink issue

Re: Cisco 2960 Switch Uplink issue