About brcruz001

brcruz001 · 04-26-2019

Hi There!I have a Catalyst 2901 as my border router, connecting to my ISP modem in bridge mode. Right behind it, I have a couple of SG200 for end devices. My ISP gives me 75 mbps of download and 30 mbps of upload speed. If I connect directly on the m...

brcruz001 · 08-04-2017

Hi Gents, I need help with my VPN setup. I configured L2TP on my 2901. Everything was working fine, until last week. I was following CISCO hardening guide, but I can't be sure that my VPN stopped right after I change a few lines on my router. Anyway,...

brcruz001 · 06-24-2017

Hi There! I'm currently using my 2901 to enable VPN access through PPTP and would like to enable digital certificates for VPN access in order to enhance security. I couldn't find much info about this setup on the web. I've got two questions in my mi...

brcruz001 · 04-20-2016

Hi everyone, I have a Cisco3750G-24PS-S running in my home environment, along with other things. I was doing fine, until summer. Now, ambient temperature is getting too high, increasing the operating temperature on Cisco3750. Usually it runs around 4...

brcruz001 · 01-16-2016

Hi there, This is my first time playing with a Router. I have a Cisco 2901, and despite the many different topics and how-to's available here and in other places, I still can't get internet access to my computer behind the router. I have a modem (pro...

brcruz001 · 04-27-2019

Alan,Thanks for your post. You and Jaderson were right! CEF was enabled globally but not on the interface level. As soon as I enabled CEF on Dialer and Gb0/1 interfaces I could reach almost 70 Mbps.Thanks for the link!

brcruz001 · 04-27-2019

Hi Georg,It's a home environment. Could you point out what are the redundant configs you're talking about? I have a L2TP VPDN that I use to dial in, and I'm trying to configure VPDN to use certificates instead of shared secret, that's the reason for ...

brcruz001 · 04-26-2019

Jaderson,Thanks for your post. I'm not using the 2901 for any impressive traffic flow, it's just a home environment. I'm already removed CDP, and left the bare minimum ACLs. I see other posts talking about 150 Mbps throughput on the same router, that...

brcruz001 · 04-26-2019

Hey, thanks for noticing! I've just removed the crypto map association with the Dialer1 interface, however, I didn't see any improvements.

brcruz001 · 06-26-2017

Philip, Fantastic, thank you for the direction. My clients will be using iphones to log on VPN. Should I follow the same recipe to import the certificates (just drop .pem files of the iPhone)?

Member Since	‎01-16-2016 03:04 PM
Date Last Visited	‎05-03-2019 01:42 AM
Posts	13

User Statistics

User Activity

Catalyst 2901 stucked at 50 mbps throughput

L2TP VPN stopped working

How to configure VPN on Cisco 2901 to use digital certificates

Cisco3750 running too hot. Alternatives?

Cisco 2901 basic config for internet access

Re: Catalyst 2901 stucked at 50 mbps throughput

Re: Catalyst 2901 stucked at 50 mbps throughput

Re: Catalyst 2901 stucked at 50 mbps throughput

Re: Catalyst 2901 stucked at 50 mbps throughput

Philip,