About HHUBS

HHUBS · 06-29-2024

How to access HOST15 from HOST2 without adding VLAN150 on the trunk of e0/2 of SW-A and SW-B?Here's the diagram: SW-A CONFIGS:SW-A#sh run int e0/2interface Ethernet0/2 switchport trunk allowed vlan 60 switchport trunk encapsulation dot1q switchport m...

HHUBS · 11-20-2022

Hello,We have C3850 24ports and we are adding vlans on the 10G trunk port. The command use were:(config-if)#switchport trunk allowed vlan add 429(config-if)#switchport trunk allowed vlan add 430(config-if)#switchport trunk allowed vlan add 431(config...

HHUBS · 03-29-2022

Why there is 8~ coming out from the putty terminal? Did anyone experience this before?

HHUBS · 06-29-2024

No, it's not possible.

HHUBS · 06-29-2024

I can access the HOST15 from HOST2 if the interface e0/2 on both of the switches is in access mode. But I don't think if it's recommended or not.

HHUBS · 06-29-2024

Thank you. I'm not familiar on that but I will search for it.

HHUBS · 06-29-2024

We have multicast coming through to both of these switches and these multicasts are the same (225.1.1.x) and on VLAN 150. So we cannot add VLAN150 on the trunk. I intend to access the hosts on SW-A on VLAN150 if I'm coming through SW-B. I will search...

HHUBS · 11-21-2022

Thanks all for your comments. Last question, @paul driver can you refer me to the doc that states that 12 entry limit?

Member Since	‎03-29-2022 02:10 AM
Date Last Visited	‎07-01-2024 01:07 AM
Posts	9

User Statistics

User Activity

Access host same VLAN but will pass on a trunk on a different VLAN

VLAN ADDITION DID NOT GO INTO CURRENT LIST

Why there is 8~ coming out from the putty terminal?

Re: Access host same VLAN but will pass on a trunk on a different VLAN

Re: Access host same VLAN but will pass on a trunk on a different VLAN

Re: Access host same VLAN but will pass on a trunk on a different VLAN

Re: Access host same VLAN but will pass on a trunk on a different VLAN

Re: VLAN ADDITION DID NOT GO INTO CURRENT LIST