Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Community, I need your support to understand if Cisco 8000v router supports VXLAN. I have two Cisco 8000v routers with bgp peering and want to configure the VXLAN between the two devices. I went through multiple documents but there is nothing spec...
Hi Community, I am testing ISR 1100 6G (Viptela OS) for DIA. I configured one of the interface ge0/3 under service VPN and enable DHCP server on it. When I connect my laptop to ge0/3 , IP was leased from DHCP server as expected and everything worked...
Hi Need your help to understand for LACP I start continuous ping between PC0 and PC1 over etherchannel. When I shut one interface fa0/2 there is no ping drop but when I bring the interface back up I observer ping drop Can you please explain me what ...
Thank you, By changing STP to RSTP there was better convergence time however still few packet drops were observed. Issue got resolved by enabling spanning tree postfast trunk on portchannel interface. interface Port-channel1switchport mode trunkspann...
Thank you David. It is working fine now after enabling portfast trunk on port channel interface. interface Port-channel1switchport mode trunkspanning-tree portfast trunk Thank you
Thankyou David, I would like to keep it in access mode to replicate my production network. Your findings regarding STP is insightful. To set etherchannel as trunk and enabling portfast we get this warring which indicates it is not best practice to us...
