Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having an odd issue connecting an ME-3400 to a Cat 2960. When I force both ports on the switches to 10/full, the link will not come up. If I set one end to auto and one to 10/full the auto port comes up at 10/half. I get the same thing if I f...
I have a customer that has recently migrated their WAN from Frame Relay to MPLS. They have some old HP DTCs that require you to bridge the traffic as it is not routeable. Not a problem with Frame Relay, but we cannot do this with IP/MPLS. Has anyo...
I have a client that is having some issues with DNS resolution over the SSL and remote user VPN. When they have a remote user logged in over the SSL VPN or the remote user VPN it takes over a minute to resolve a name while mapping a drive. I have c...
I have a client that is looking to deploy CCM Express and Unity Express. My question is: does Unity Express support integration with Exchange like the standard Unity. Also, if anyone knows of issues or "gotchas" for the CCM Express/Unity Express pl...
Here is the link to setting up the AP for the 7920 phones. Once I completed this setup, everything started working.http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_book09186a00802a029a.htmlThanks,Jack
Yes, we did. It actually was the QOS setup on the wireless APs. Even though the APs are being used only for the phones, you still have to specify QOS in order for them to work properly.Thanks,Jack
The firmware version on the 7920 is 7920.4.0-03-00 and the firmware on the 7960 is 8.0(4.0). I did put the TFTP option on the Data VLAN. I have also forced both phones over to the Data vlan and they are now working fine.Thanks,Jack
