09-10-2007 11:07 AM - edited 03-05-2019 06:23 PM
I am preparing to convert a 6509 from CatOS to IOS. I was wondering if anyone knows if there is a way to convert back from IOS to CatOS?
Thanks,
Jack
Solved! Go to Solution.
09-10-2007 11:34 AM
Hi Jack,
Here you are both:
System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH,
Mohammed Mahmoud.
09-10-2007 11:34 AM
Hi Jack,
Here you are both:
System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: