Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have 2 wan links at branch end to reach the DC. When we are trying to access to DC applications outgoing traffic is going one link and return traffic is taking other link.
We want return traffic on same link.
Please suggest how we take fix ...
Hi,
Branch Router having 2 wan links. Please help on the below requirements.
1. 10.10.0.1 Accessible via Primary Link
2. 10.10.0.2 Accessible via Secondary link
3. If any one link goes down traffic has to shift to other link.
I want to changes onl...
HI,
When I am checking sh run int gi0/0 duplex is auto, but when checked in sh int gi0/0 duplex is full.
Please let me know what is the meaning.
#sh run int Gi0/0Building configuration...
Current configuration : 243 bytes!interface GigabitEthernet0/...
Hi,
the below source IP subnets from DC router, however the same segment already they are using to connect the services with source static NAT.
Please help how we can do it.
Source IP : 10.6.0.0/16, 10.9.0.0/16
Destination IP: 10.150.156.72
Port 44...
Hi,
KGI-MPLS-CORE1#sh ip routeCodes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E...
Hi,
Here is logs from DC and attached configuration at DC end.
sh ip route 10.221.1.37Routing entry for 10.221.1.37/32 Known via "connected", distance 0, metric 0 (connected) Routing Descriptor Blocks: * directly connected, via GigabitEtherne...
