Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have a brand new Access point for our Mesh Network, the model is: AIR-AP1572EC1-A-K9, this is not working either with Poe or power Injector, I'd like to know what is the power supplied that I need for the connector PN:29-100226-01, I'll be wait...
Hi Guys,
I have a remote site currently configured using two routers, one for data an other as a voice gateway, now we are going to move everything to the at&t circuit, do I need to do configuration only for local deal-peer or Call manager changes w...
Hi guys, I have a platform with this elements: MSE7.4.100.0CISCO PRIME NCS 1.1.2.12WLC 55087.2.115.1I would like to active the Wips functionality on the access points 1131, I have already the Wips License over the MSE, I don't know if there is some c...
Hey guys,I updated the software to version 8.0.110.0 for the WLC 2504 two days ago, it worked fine until this morning that it crashed, it's was blinking amber and green and the SYS light as well, I couldn't ping it, then I took the power cable off, a...
Hi Guys,Our company is going to renew the whole wireless platform, we have 1242 for all the places, I know the renewal part for this is 1600, but I would like 2600, please let me know your comments about it, this is for offices and warehouses.Regards...
Andrey,
it impacts directly in how the antenna works, because every single antenna has a gain parameter, let' say antenna AIR-ANT4941 is for 2.2 dbi, therefore you need to set this on the WLC for the Access point to work as the way it should.
Regards...
Hola,A decir verdad desde el controlador no lo puedes hacer asi como lo quieres, una forma en la que puedes verlo como quieres, es con el Cisco Prime Infrastructure, hay ya sea desde el menu o desde los mapas puedes ver que cantidad de clientes que h...
Lo que estas realizando es un puente inalambrico, o lo que quieres es realizar una red Mesh??Los equipos estan conectados a un controlador o de forma autonoma??? quedo a espera de tus comentarios.Saludos cordiales,Alberto Badilla.
Hola,Para esto necesitas hacer varios pasos:http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/https://supportforums.cisco.com/video/11928901/lwapp-lightweight-mode-autonomous-conversion-and-vice-versaespero que la informacion de los...
