Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day, dear colleagues.I need configure my PoE switches power OFF port at next time-rangeAt weekdays, power off at 20:00 power on at 8:00.At weekend - power off all days.I have next configuration port, example:energywise level 10 recurrence import...
Hello everyone!I have 3560 catalyst ios 12.2(55)SE5 I need to authorize PC and IP phone on this port. 212 data vlan 500 voice vlan, vlan 111 - Unauthorized VLAN with 256 kbit/sec INTERNET without any local resourses. IP phone authorizes by mab.#sh ma...
Hellow everyone.I have VPN ASA5520-SSL500-K9.About:This platform has an ASA 5520 VPN Plus license.VPN Peers : 750AnyConnect for Mobile : DisabledI need to know which type of license shoud I buy to activate AnyConnect for mob...
Hellow everyone.Now L3 work in 3825 router and I have in peak 600 mbit and almost 70% cpu load. I need to wrap up the traffic even with the office and I think 3825 will not cope with the load. The load will grow up to 300 Mbps at leastI have 2 3750g-...
Hello everyone.I have WLC 4402 working with AIR-AP1131AG-E-K9.Need to buy another pair. I looked to the side air-ap1041n-e-k9. Tell me whether or not the compatibility of the controller and the AP1041n? One more question. When buying in 1131 is still...
[HAKUNA MATATA] :D
Leo Laohoo, th's for your answer.
But I need power off at weekend too.
Correct my configuration if I'm not right:
--------------------------------------------------------------------------------
time-range power_on
absolute start 0...
Good afternoon. Thanks for Your advice. The problem was the following: forgot to add the command aaa authorization network default group radiusNow everything is working. Fa0/2 001b.bafb.7c1c mab VOICE Authz Success 0A32FF15000000B6500A...
