Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi When configuring the CDP filter on the interface connected to the phone, the phone is unable to identify the correct voice VLAN and is instead obtaining an IP address from the data VLAN.cdp tlv-list CDP-Filtercapabilityversionplatformnative-vlandu...
Hi all, We have a one scenario that spanning tree choosing VPC peer link as root port instead of direct connect link toward spanning tree root. Diagram attached for reference. Spanning tree version RSTP.Path cost is default.VLAN - 570 C9K2 - Root for...
is there any update on ISE configuration on ios xe switches from old ios switch ? I am facing issue regarding authentication in cat 9ks.i replicate my old ios configuration on the new ios xe switches and from the switch client to getting authenticat...
Hi,We are trying to configure ISE on 9300 switch (Access Switch) (ios-xe 17.03.05).But end device not getting ip from dhcp server which is on the core switch. I am sharing "show run" output. Can some one help me to find problem ?Thanks in advance. r...
Hello all,I am doing OSPF config.Fortinate is connected to Core Switch, using deafult route.On Core Switch has many static routes, I want to Redistribute Static route into OSPF and filter Static route using access list and route-map.But in ospf defau...
We do have VPC peer switch configure.I have search this on community found similar issue Solved: Spanning Tree with vPC and non-VPC - Cisco Community.Mention over there,"vPC imposes the rule that the peer link should never be blocking because this li...
VLAN 570 is allowed properly allowed on those links. I am still confused why N7K-1 switch choosing root path cast as 3, where direct link is having path cost of 2.Please suggest if I am missing anything
